Adjusting The Altitude; Performing A Developer And Transfer Roller Cleaning Procedure; Performing A Transfer Belt Cleaning Mode Procedure - Xerox VersaLink C605 User Manual

Maintenance
4. To increase or decrease the fusing temperature, touch the arrow buttons, then touch
Adjust.
5. To adjust the fuser for another paper type, select it from the list, then repeat steps
3 and 4.
6. To exit the menu, touch X.
7. To return to the Home screen, press the Home button.

Adjusting the Altitude

Use Adjust Altitude to adjust the altitude to match that of the location where the printer
is installed. If the altitude setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Altitude Adjustment.
3. Touch the altitude of the location of the printer, then touch OK.
4. To return to the Home screen, press the Home button.

Performing a Developer and Transfer Roller Cleaning Procedure

When a printer sits idle for an extended time, visible background toner can potentially
appear on prints. Use the Developer and Transfer Roller Cleaning procedure to reduce
background toner on prints.
To perform a Developer and Transfer Roller Cleaning procedure:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Developer & Transfer Roller Cleaning.
3. To perform a Developer and Transfer Roller Cleaning, touch Start.
4. At the successfully completed prompt, touch Close.
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.

Performing a Transfer Belt Cleaning Mode Procedure

Debris on the transfer belt can cause vertical black or color-streaks and lines to appear
on prints. To remove black or color-streaks and lines on prints, use the Belt Cleaning
Mode procedure.
To perform a Belt Cleaning Mode procedure:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Belt Cleaning Mode.
3. To perform a Belt Cleaning Mode procedure, touch Start.
4. At the successfully completed prompt, touch Close.
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.
7-16
® ®
Xerox VersaLink C605 Multifunction Printer
User Guide