Ipv6 Prefix-List - Dell Z9500 Command Reference Manual

Defaults
•
•
•
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage
Information
The higher the administrative distance assigned to a route means that your
confidence in that route is low. Routes assigned an administrative distance of 255
are not installed in the routing table.
Routes from confederations are treated as internal BGP routes.

ipv6 prefix-list

Configure an IPv6 prefix list.
Z9500
Syntax
ipv6 prefix-list prefix-list name
Parameters
prefix-list name
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Border Gateway Protocol
external-distance = 20
internal-distance = 200
local-distance = 200
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
CAUTION: Dell Networking recommends that you do not change the
administrative distance of internal routes. Changing the administrative
distances may cause routing table inconsistencies.
Enter the name of the prefix list.
NOTE: There is a 140-character limit for prefix list
names.
535