Displaying And Editing File - YASKAWA YRC1000 Instructions Manual

6 Form Cut Setting File
6.4

Displaying and Editing File

6.4 Displaying and Editing File
1. Select the application menu under the main menu.
– The application menu differs depending on the robot application:
• For arc welding: {ARC WELDING}
• For handling: {HANDLING}
• For general-purpose: {GENERAL}
• For spot welding: {SPOT WELDING}
2. Select {FORM CUT SETTING FILE}.
3. Display the file of desired condition No.
– There are two methods to display the file of desired condition No.
• Call the file of desired condition No.using [PAGE].
Press [PAGE] to call the next condition No.
Press [SHIFT]+[PAGE] to call the previous condition No.
• Enter the desired condition No.
Enter the desired condition No. with number keys, then press
[ENTER].
4. Select each setting item and set.
6-12
HW1483590
HW1483590
46/49