Enabling The Modification Of Position Data Only - YASKAWA DX100 Operator's Manual

DX100
5.6
5 Editing Jobs

5.6 Enabling the Modification of Position Data Only

Enabling the Modification of Position Data Only
Even in the edit-locked job, the position data can be modified.
1. Select {SETUP} under the main menu.
2. Select {TEACHING CONDITION SETTING}.
– The TEACHING CONDITION SETTING window appears.
TEACHING CONDITION SETTING window is shown only
SUPPLE-
when the security mode is edit mode or management mode.
MENT
3. Select "STEP ONLY CHANGING" and press [SELECT].
– Each time [SELECT] is pressed, the setting alternates between
"PROHIBIT" and "PERMIT".
5-14
155507-1CD
RE-CSO-A037
240 of 554