Functions; Types Of Operation; Editing Mode (Edit) - YASKAWA MOTIONPACK-110 Descriptive Information

3. FUNCTIONS
3.1 TYPES OF OPERATION MODES
Motionpack-110 has the following 8 types of operation modes:
(1) Editing Mode (EDIT)
(2) Memory Operation Mode (MEM) ...... Automatic operation
(3) Jogging Mode (JOG) ...... Manual operation
(4) Step Operation Mode (STEP) ...... Manual operation
(5) Rapid Feed Motion (RAPID) ...... Manual operation
(6) Manual Feed Mode (HANDLE) ...... Manual operation
(7) DNC Operation Mode (DNC) ...... DNC automatic operation
(8) MDI Operation Mode (MDI) ...... Automatic operation (with CRT control station Type
H012)
These modes are selected by externalinput signals EDIT, MEM, JOG, STEP,
RAPID, HANDLE, DNC, and MDI.
MOTION
MACHINE MODULE
EDIT
MEM
JOG
STEP _ .
RAPID _ .
HANDLE
DNC _ '"
MDI _---
Fig. 3.1
3.1.1 EDITING MODE (EDIT)
This mode is used when writing and reading programs and parameters in the memory in
the motion module, or doing other editing operations. These editing operations are executed
from the CRT control station or from a personal computer, as detailed in Section 7
"OPERATION OF CRT CONTROL STATION" or Section 8 "PERSONAL COMPUTER".
22