Rep 12.24 Eject Shaft Assembly - Xerox VersaLink B7025 Service Manual

9. Remove the rear tamper home sensor (1) from the bracket,
Figure 4 Rear tamper home sensor removal
Replacement
The replacement is the reverse of the removal procedure.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer

REP 12.24 Eject Shaft Assembly

Figure 4.
Parts List on
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the compiler assembly,
2. Remove the bracket assembly,
a.
b.
c.
April 2017
4-87
PL 12.25
WARNING
REP 12.19.
Figure 1:
Release the harness from the two clamps (1).
Remove two screws (2).
Remove the bracket assembly (3).
Figure 1 Bracket assembly removal
GP 10. Disconnect the power cord
Repairs and Adjustments
REP 12.23, REP 12.24