REP 7.2 Tray 2, 3 and 4 Paper Transport Sensors and
Transport Roll Gear
Parts List on
PL 7.25
and
PL 8.10
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to General Disassembly Precautions,
1.
Power off the machine. Disconnect the power cord.
2.
If necessary, remove the finisher,
REP
Mandatory safety warning. This procedure must be performed by two people. The mod-
ule is heavy.
NOTE: The weight of the machine is 45Kg (99lb). The weight of each additional tray is 11.85Kg
(26lb).
3.
Remove the machine from the stack of trays.
Repairs and Adjustments
REP 7.2
WARNING
WARNING
CAUTION
GP
12.1.
WARNING
10.
January 2016
4-108
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/