PIM-SM C
OMMANDS
-
SHOW IP PIM SPARSE
MODE MROUTE DETAIL
show ip pim sparse-mode mroute detail
Overview
This command displays detailed entries of the IP multicast routing table, or
detailed entries of the IP multicast routing table based on the specified address or
addresses.
Two group addresses cannot be used simultaneously; two source addresses
cannot be used simultaneously.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip pim sparse-mode mroute
Syntax
[<group-address>|<source-address>] detail
show ip pim sparse-mode mroute [<group-address>
<source-address>] detail
show ip pim sparse-mode mroute [<source-address>
<group-address>] detail
Usage
Based on the group and source address, the output is the selected route if present
in the multicast route tree.
Mode
User Exec and Privileged Exec
awplus#
Examples
awplus#
awplus#
awplus#
detail
C613-50103-01 REV A
Parameter
<group-address>
<source-address>
detail
show ip pim sparse-mode mroute detail
show ip pim sparse-mode mroute 40.40.40.11 detail
show ip pim sparse-mode mroute 224.1.1.1 detail
show ip pim sparse-mode mroute 224.1.1.1 40.40.40.11
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Group IP address, entered in the form A.B.C.D. Output is all
multicast entries belonging to that group.
Source IP address, entered in the form A.B.C.D. Output is all
multicast entries belonging to that source.
Show detailed information.
"Getting Started
Guide.
1252