Auth Max-Supplicant - Allied Telesis x310-26FT Command Reference Manual

A C
UTHENTICATION OMMANDS
-
AUTH MAX SUPPLICANT

auth max-supplicant

Overview This command sets the maximum number of supplicants (client devices) that can
be authenticated on the selected port. Once this value is exceeded, further
supplicants will not be authenticated.
The no variant of this command resets the maximum supplicant number to the
default.
auth max-supplicant <2-1024>
Syntax
no auth max-supplicant
Default The max supplicant of port authentication is 1024.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port; or Authentication Profile mode.
To set the maximum number of supplicants to 10 on interface port1.0.2, use
Examples
the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To reset the maximum number of supplicant to default on interface port1.0.2,
use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To set the maximum number of supplicants to 10 on authentication profile
'student', use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
To reset the maximum number of supplicant to default on authentication profile
'student', use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
C613-50103-01 REV A
Parameter Description
<2-1024>
Limit number.
configure terminal
interface port1.0.2
configure terminal
interface port1.0.2
configure terminal
auth profile student
configure terminal
auth profile student
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
auth max-supplicant 10
no auth max-supplicant
auth max-supplicant 10
no auth max-supplicant
1602