Router-Id (Ipv6 Ospf) - Allied Telesis x310-26FT Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
- (IP 6 OSPF)
ROUTER ID V

router-id (IPv6 OSPF)

Overview Use this command to specify a router ID for the IPv6 OSPF process.
Use the no variant of this command to disable this function.
Syntax router-id <router-id>
no router-id
Mode Router Configuration
Usage Configure each router with a unique router-id. In an IPv6 OSPF router process that
has active neighbors, a new router-id takes effect at the next reload or when you
restart OSPF manually.
Example The following example shows a specified router ID 0.0.4.5.
awplus#
awplus(config)#
awplus(config-router)#
Related show ipv6 ospf
Commands
C613-50103-01 REV A
Parameter Description
<router-id>
Specifies the router ID in IPv4 address format.
configure terminal
router ipv6 ospf
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
router-id 0.0.4.5
1025