Ip Pim Spt-Threshold Group-List - Allied Telesis x310-26FT Command Reference Manual

PIM-SM C
OMMANDS
- -
IP PIM SPT THRESHOLD GROUP LIST

ip pim spt-threshold group-list

Overview Use this command to turn on the ability for the last-hop PIM router to switch to SPT
(shortest-path tree) for multicast group addresses specified by the given
access-list.
The switching to SPT happens either at the receiving of the first data packet, or not
at all; it is not rate-based.
Use the no variant of this command to turn off switching to the SPT.
ip pim spt-threshold group-list {<simplerange>|<expandedrange>|
Syntax
<named-accesslist>}
no ip pim spt-threshold group-list
[<simplerange>|<expandedrange>| <named-accesslist>]
Mode Global Configuration
Usage Turn on/off the ability for the last-hop PIM router to switch to SPT for multicast
group addresses specified by the given access-list.
awplus#
Example
awplus(config)#
awplus(config)#
Related ip pim spt-threshold
Commands
C613-50103-01 REV A
Parameter
<simplerange>
<expandedrange>
<named-accesslist>
configure terminal
ip pim spt-threshold group-list 1
access-list 1 permit 224.0.1.3
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
<1-99> IP Standard Access-list.
<1300-1999> IP Standard Access-list (expanded range).
IP Access-list name.
1241