Ipv6 Pim Cisco-Register-Checksum - Allied Telesis x310-26FT Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 - -
IPV PIM CISCO REGISTER CHECKSUM

ipv6 pim cisco-register-checksum

Overview Use this command to configure the option to calculate the Register Checksum
over the whole packet. This command is used to inter-operate with older Cisco IOS
versions.
Use the no variant of this command to disable this option.
Syntax ipv6 pim cisco-register-checksum
no ipv6 pim cisco-register-checksum
Default This command is disabled by default. By default, Register Checksum is calculated
only over the header.
Mode Global Configuration
awplus#
Example
awplus(config)#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
C613-50103-01 REV A
configure terminal
ipv6 forwarding
ipv6 multicast-routing
ipv6 pim cisco-register-checksum
configure terminal
no ipv6 pim cisco-register-checksum
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1274