Ip Pim Cisco-Register-Checksum Group-List - Allied Telesis x310-26FT Command Reference Manual

PIM-SM C
OMMANDS
- -
IP PIM CISCO REGISTER CHECKSUM GROUP

ip pim cisco-register-checksum group-list

Overview Use this command to configure the option to calculate the Register checksum over
the whole packet on multicast groups specified by the access-list. This command
is used to inter-operate with older Cisco IOS versions.
Use the no variant of this command to revert to default settings.
Syntax ip pim cisco-register-checksum group-list
[<simplerange>|<exprange>|<access-list>]
no ip pim cisco-register-checksum group-list
[<simplerange>|<exprange>|<access-ist>]
Mode Global Configuration
awplus#
Example
awplus(config)#
awplus(config)#
C613-50103-01 REV A
-
LIST
Parameter Description
<simplerange>
<1-99> Simple access-list.
<exprange>
<1300-1999> Simple access-list (expanded range).
<access-list>
IP Named Standard Access list.
configure terminal
ip pim cisco-register-checksum group-list 34
access-list 34 permit 224.0.1.3
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1220