Aaa Authentication Dot1X - Allied Telesis x310-26FT Command Reference Manual

X310 series stackable access switches for alliedware plus version 5.4.6-1.x
Table of Contents

Advertisement

AAA C
OMMANDS
1
AAA AUTHENTICATION DOT
X

aaa authentication dot1x

Overview
This command enables IEEE 802.1X-based authentication globally and allows you
to enable either the default authentication method list (in this case, a list of RADIUS
servers), which is automatically applied to every interface running IEEE
802.1X-based authentication, or a user named authentication method list, which is
applied to an interface with the
Use the no variant of this command to disable either the default or a named
method list for 802.1X-based authentication. Once all method lists are disabled
802.1x-based authentication is disabled globally.
aaa authentication dot1x {default|<list-name>} group
Syntax
{<group-name>|radius}
no aaa authentication dot1x {default|<list-name>}
Default
802.1X-based Port Authentication is disabled by default.
Mode
Global Configuration
Usage
This command can be used to configure either the default authentication method
list or a named authentication method list:
There are two ways to define servers where RADIUS accounting messages are sent:
Examples
To enable 802.1X-based authentication globally with all RADIUS servers, and use
all available RADIUS servers, use the command:
awplus#
awplus(config)#
C613-50103-01 REV A
Parameter
Description
default
Configure the default authentication method list
<list-name>
Configure a named authentication method list
group
Use a server group
<group-name>
Server group name.
radius
Use all RADIUS servers.
default: the default authentication method list which is automatically
applied to all interfaces with 802.1X-based authentication enabled.
<list-name>: a user named list which can be applied to an interface using the
aaa authentication dot1x
group radius: use all RADIUS servers configured by
command
group <group-name>: use the specified RADIUS server group configured
with the
aaa group server
configure terminal
aaa authentication dot1x default group radius
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
dot1x authentication
command.
command.
command
radius-server host
1715

Advertisement

Table of Contents
loading

This manual is also suitable for:

X310-26fpX310-50fpX310-50ft

Table of Contents