Qos Commands; Introduction - Allied Telesis x310-26FT Command Reference Manual

37

Introduction

Overview This chapter provides an alphabetical reference for Quality of Service commands.
QoS uses ACLs. For more information about ACLs, see the
and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A

QoS Commands

Guide.
"class" on page 1485
"class-map" on page 1486
"clear mls qos interface
"default-action" on page 1488
"description (QoS policy-map)" on page 1489
"egress-rate-limit" on page 1490
"match access-group" on page 1491
"match cos" on page 1493
"match dscp" on page 1494
"match eth-format protocol" on page 1495
"match inner-cos" on page 1498
"match inner-vlan" on page 1499
"match ip-precedence" on page 1500
"match mac-type" on page 1501
"match tcp-flags" on page 1502
"match vlan" on page 1503
"mls qos cos" on page 1504
"mls qos enable" on page 1505
"mls qos map cos-queue
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
policer-counters" on page 1487
to" on page 1506
ACL Feature Overview
1483