Undebug Ipv6 Pim Sparse-Mode - Allied Telesis x310-26FT Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
UNDEBUG IPV PIM SPARSE MODE

undebug ipv6 pim sparse-mode

Overview Use this command to deactivate PIM-SMv6 debugging. Note that this command is
an alias of the no variant of the
undebug ipv6 pim sparse-mode [all] [events] [mfc] [mib]
Syntax
[nexthop] [nsm] [state] [timer]
Mode Privileged Exec and Global Configuration
awplus#
Example
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
awplus(config)#
C613-50103-01 REV A
Parameter Description
all
Deactivates all PIM-SMv6 debugging.
events
Deactivates debug printing of PIM-SMv6 events.
mfc
Deactivates debug printing of MFC (Multicast Forwarding Cache).
mib
Deactivates debug printing of PIM-SMv6 MIBs.
nexthop
Deactivates debug printing of PIM-SMv6 next hop communications.
nsm
Deactivates debugging of PIM-SMv6 NSM (Network Services Module)
communications.
state
Deactivates debug printing of state transition on all PIM-SMv6 FSMs.
timer
Deactivates debug printing of PIM-SMv6 timers.
configure terminal
terminal monitor
undebug ipv6 pim sparse-mode all
configure terminal
terminal monitor
undebug ipv6 pim sparse-mode events
configure terminal
terminal monitor
undebug ipv6 pim sparse-mode nexthop
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
debug ipv6 pim sparse-mode command.
1319