Ip Pim Ext-Srcs-Directly-Connected (Pim-Dm) - Allied Telesis x310-26FT Command Reference Manual

PIM-DM C
OMMANDS
- - -
IP PIM EXT SRCS DIRECTLY CONNECTED

ip pim ext-srcs-directly-connected (PIM-DM)

Overview Use this command to configure PIM to treat all source traffic arriving on the
interface as though it was sent from a host directly connected to the interface.
This command is described in detail in the
pim ext-srcs-directly-connected (PIM-SM)
C613-50103-01 REV A
(PIM-DM)
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-SM Commands chapter. See the
command.
ip
1334