Table of Contents
Advertisement
OSPF C
OMMANDS
SHOW IP OSPF ROUTE
show ip ospf route
Use this command to display the OSPF routing table. Include the process ID
Overview
parameter with this command to display the OSPF routing table for specified
instances.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip ospf [<ospf-id>] route
Syntax
Mode
User Exec and Privileged Exec
Examples
To display the OSPF routing table, use the command:
awplus#
Output
Figure 24-21: Example output from the show ip ospf route command for a
OSPF process 1:
Codes: C - connected, D - Discard, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
O
10.10.0.0/24 [10] is directly connected, vlan1, Area 0.0.0.0
O
10.10.11.0/24 [10] is directly connected, vlan2, Area 0.0.0.0
O
10.10.11.100/32 [10] is directly connected, lo, Area 0.0.0.0
E2 10.15.0.0/24 [10/50] via 10.10.0.1, vlan1
IA 172.16.10.0/24 [30] via 10.10.11.50, vlan2, Area 0.0.0.0
E2 192.168.0.0/16 [10/20] via 10.10.11.50, vlan2
C613-50103-01 REV A
Parameter
Description
<ospf-id>
<0-65535> The ID of the router process for which information will be
displayed. If this parameter is included, only the information for this
specified routing process is displayed.
show ip ospf route
specific process
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
954
Advertisement
Table of Contents
