Debug Ipv6 Ospf Ifsm - Allied Telesis x310-26FT Command Reference Manual

OSPF 3 IP 6 C
V FOR V OMMANDS
6
DEBUG IPV OSPF IFSM

debug ipv6 ospf ifsm

Overview This command specifies debugging options for IPv6 OSPF Interface Finite State
Machine (IFSM) troubleshooting.
To enable all debugging options, specify debug ipv6 ospf ifsm with no additional
parameters.
The no and undebug variants of this command disable IPv6 OSPF IFSM
debugging. Use these commands without parameters to disable all the options.
debug ipv6 ospf ifsm [events] [status] [timers]
Syntax
no debug ipv6 ospf ifsm [events] [status] [timers]
Mode Privileged Exec and Global Configuration
Example To specify IPv6 OSPF debugging options to display IPv6 OSPF IFSM events
information, use the following commands:
awplus#
Related terminal monitor
Commands
undebug ipv6 ospf ifsm
C613-50103-01 REV A
Parameter Description
events
Displays IFSM event information.
status
Displays IFSM status information.
timers
Displays IFSM timer information.
debug ipv6 ospf ifsm events
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
991