Table of Contents
Advertisement
OSPF
3
IP
6 C
V
FOR
V
OMMANDS
6
DEBUG IPV
OSPF ROUTE
debug ipv6 ospf route
Overview
This command enables debugging of route calculation. Use this command
without parameters to turn on all the options.
The no and undebug variants of this command disable IPv6 OSPF route
debugging. Use this command without parameters to disable all options.
Syntax
debug ipv6 ospf route [ase] [ia] [install] [spf]
no debug ipv6 ospf route [ase] [ia] [install] [spf]
Mode
Privileged Exec and Global Configuration
Examples
To enable IPv6 route debugging of inter-area route calculations, use the following
command:
awplus#
Related
terminal monitor
Commands
undebug ipv6 ospf route
C613-50103-01 REV A
Parameter
Description
ase
Specifies the debugging of external route calculation.
ia
Specifies the debugging of inter-area route calculation.
install
Specifies the debugging of route installation.
spf
Specifies the debugging of SPF calculation.
debug ipv6 ospf route ia
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
995
Advertisement
Table of Contents
