Show Dos Interface - Allied Telesis x310-26FT Command Reference Manual

IP 4 S A C
V OFTWARE CCESS ONTROL

SHOW DOS INTERFACE

show dos interface
Overview Use this command to display the Denial-of-Service (DoS) features configured on a
switch port interface from the
descriptions of DoS attack types.
show dos interface {<port-list>}
Syntax
Mode Privileged Exec
Output Figure 34-1: Example output from the show dos interface command prior to a
C613-50103-01 REV A
L (ACL) C
IST OMMANDS
Parameter Description
<port-list>
Specify the switch port or port list to display DoS configuration
options set with the
DoS attack
awplus#configure terminal
Enter configuration commands, one per line. End with CTNTL/Z.
awplus(config)#interface port1.0.1
awplus(config-if)#dos synflood action shutdown
awplus(config-if)#exit
awplus(config)#exit
awplus#show dos interface port1.0.1

DoS settings for interface port1.0.1
-----------------------------------------
Port status
ipoptions
land
ping-of-death
smurf
synflood
Action
Attacks detected : 0
teardrop
awplus#
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
dos command. See the
dos command.
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Shutdown port
: Disabled
dos command for
1430