Ip Pim Dr-Priority - Allied Telesis x310-26FT Command Reference Manual

PIM-SM C
OMMANDS
-
IP PIM DR PRIORITY

ip pim dr-priority

Overview Use this command to set the Designated Router priority value.
Use the no variant of this command to disable this function.
Syntax ip pim dr-priority
no ip pim dr-priority [<priority>]
Default The default is 1. The negated form of this command restores the value to the
default.
Mode Interface Configuration for a VLAN interface.
Examples To set the Designated Router priority value to 11234 for the VLAN interface vlan2,
apply the commands as shown below:
awplus#
awplus(config)#
awplus(config-if)#
To disable the Designated Router priority value for the VLAN interface vlan2, apply
the commands as shown below:
awplus#
awplus(config)#
awplus(config-if)#
Related ip pim ignore-rp-set-priority
Commands
C613-50103-01 REV A
Parameter Description
<priority>
<0-4294967294>
The Designated Router priority value.
A higher value has a higher preference.
configure terminal
interface vlan2
configure terminal
interface vlan2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
<priority>
ip pim dr-priority 11234
no ip pim dr-priority
1222