Clear Mls Qos Interface Policer-Counters - Allied Telesis x310-26FT Command Reference Manual

Q S C
O OMMANDS
CLEAR MLS QOS INTERFACE POLICER

clear mls qos interface policer-counters

Overview Resets an interface's policer counters to zero. You can either clear a specific
class-map, or you can clear all class-maps by not specifying a class map.
clear mls qos interface <port> policer-counters [class-map
Syntax
<class-map>]
Mode Privileged Exec
Example To reset the policy counters to zero for all class-maps for port1.0.1, use the
command:
awplus#
Related show mls qos interface policer-counters
Commands
C613-50103-01 REV A
-
COUNTERS
Parameter
<port>
class-map
<class-map>
clear mls qos interface port1.0.1 policer-counters
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The port may be a switch port (e.g. port1.0.4), a static
channel group (e.g. sa3), or a dynamic (LACP) channel group
(e.g. po4).
Select a class-map.
Class-map name.
1487