Table of Contents
Advertisement
Q
S C
O
OMMANDS
MATCH DSCP
match dscp
Overview
Use this command to define the DSCP to match against incoming packets.
Use the no variant of this command to remove a previously defined DSCP.
Syntax
match dscp <0-63>
no match dscp
Mode
Class Map Configuration
Usage
Use the match dscp command to define the match criterion after creating a
class-map.
To configure a class-map named cmap1 with criterion that matches DSCP 56, use
Examples
the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
To remove a previously defined DSCP from a class-map named cmap1, use the
commands:
awplus#
awplus(config)#
awplus(config-cmap)#
Related
class-map
Commands
C613-50103-01 REV A
Parameter
Description
<0-63>
Specify DSCP value (only one value can be specified).
configure terminal
class-map cmap1
configure terminal
class-map cmap1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
match dscp 56
no match dscp
1494
Advertisement
Table of Contents
