Table of Contents
Advertisement
OSPF
3
IP
6 C
V
FOR
V
OMMANDS
6
SHOW IPV
OSPF ROUTE
show ipv6 ospf route
Overview
Use this command in User Exec or Privileged Exec modes to display the OSPF
routing table. Include the process ID parameter with this command to display the
OSPF routing table for specified processes.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ipv6 ospf [<process-id>] route
Syntax
Mode
User Exec and Privileged Exec
Examples
To display the OSPF routing table, use the command:
awplus#
C613-50103-01 REV A
Parameter
Description
<process-id>
A character string that specifies the router process. If this
parameter is included, only the information for this specified
routing process is displayed.
show ipv6 ospf route
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
1048
Advertisement
Table of Contents
