Access-Group - Allied Telesis x310-26FT Command Reference Manual

IP 4 H A C
V ARDWARE CCESS ONTROL
-
ACCESS GROUP

access-group

Overview This command adds or removes a hardware-based access-list to or from a switch
port interface. The number of hardware numbered and named access-lists that can
be added to a switch port interface is determined by the available memory in
hardware-based packet classification tables.
This command works in Interface Configuration mode to apply hardware
access-lists to selected switch port interfaces.
The no variant of this command removes the selected access-list from an interface.
access-group
Syntax
[<3000-3699>|<4000-4699>|<hardware-access-list-name>]
no access-group
[<3000-3699>|4000-4699|<hardware-access-list-name>]
Mode Interface Configuration for a switch port interface
Default Any traffic on an interface controlled by a hardware ACL that does not explicitly
match a filter is permitted.
Usage First create an IP access-list that applies the appropriate permit/deny requirements
with the
MAC numbered)
use this command to apply this hardware access- list to a specific port or port
range. Note that this command will apply the access-list only to incoming data
packets.
To apply ACLs to an LACP aggregated link, apply it to all the individual switch ports
in the aggregated group. To apply ACLs to a static channel group, apply it to the
static channel group itself. An ACL can even be applied to a static aggregated link
that spans more than one switch instance
Note that you cannot apply software numbered ACLs to switch port interfaces with
the access-group command. This command will only apply hardware ACLs.
NOTE
C613-50103-01 REV A
L (ACL) C
IST OMMANDS
Parameter
<3000-3699>
<4000-4699>
<hardware-access-list-name>
access-list (hardware IP numbered)
command or the
: Hardware ACLs will permit access unless explicitly denied by an ACL action.
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Hardware IP access-list.
Hardware MAC access-list.
The hardware access-list name.
command, the
access-list hardware (named)
(Link Aggregation
access-list (hardware
command. Then
Commands).
1354