Ip Pim Neighbor-Filter (Pim-Dm) - Allied Telesis x310-26FT Command Reference Manual

PIM-DM C
OMMANDS
- (PIM-DM)
IP PIM NEIGHBOR FILTER

ip pim neighbor-filter (PIM-DM)

Overview Enables filtering of neighbors on the VLAN interface. When configuring a neighbor
filter, PIM-DM will either not establish adjacency with the neighbor, or terminate
adjacency with the existing neighbors if denied by the filtering access list.
Use the no variant of this command to disable this function.
Syntax ip pim neighbor-filter [<number>|<accesslist>]
no ip pim neighbor-filter [<number>|<accesslist>]
Default By default, there is no filtering.
Mode Interface Configuration for a VLAN interface.
awplus#
Example
awplus(config)#
awplus(config-if)#
C613-50103-01 REV A
Parameter Description
<number> <1-99> Standard IP access list number.
<accesslist> IP access list name.
configure terminal
interface vlan2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ip pim neighbor-filter 14
1339