Auth-Web-Server Host-Name - Allied Telesis x310-26FT Command Reference Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER HOST NAME

auth-web-server host-name

Overview This command assigns a hostname to the web authentication server.
Use the no variant of this command to remove the hostname from the web
authentication server.
Syntax auth-web-server host-name <hostname>
no auth-web-server host-name
Default The web authentication server has no hostname.
Mode Global Configuration
Usage When the web authentication server uses HTTPS protocol, the web browser will
validate the certificate. If the certificate is invalid, the web page gives a warning
message before displaying server content. However, the web page will not give
warning message if the server has a hostname same as the one stored in the
installed certificate.
Examples To set the auth.example.com as the hostname of the web authentication server,
use the commands:
awplus#
awplus(config)#
To remove hostname auth.example.com from the web authentication server, use
the commands:
awplus#
awplus(config)#
Related aaa authentication auth-web
Commands
auth-web enable
C613-50103-01 REV A
Parameter
<hostname>
configure terminal
auth-web-server host-name auth.example.com
configure terminal
no auth-web-server host-name
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
URL string of the hostname
1651