Wrr-Queue Egress-Rate-Limit Queues - Allied Telesis x310-26FT Command Reference Manual

X310 series stackable access switches for alliedware plus version 5.4.6-1.x
Table of Contents

Advertisement

Q
S C
O
OMMANDS
-
-
-
WRR
QUEUE EGRESS
RATE
LIMIT QUEUES

wrr-queue egress-rate-limit queues

Overview
Sets a limit on the amount of traffic that can be transmitted per second from these
queues. The default unit is in Kb, but Mb or Gb can also be specified. The minimum
is 651Kb.
wrr-queue egress-rate-limit <bandwidth> queues
Syntax
[0][1][2][3][4][5][6][7]
no wrr-queue egress-rate-limit <bandwidth> queues
[0][1][2][3][4][5][6][7]
Mode
Interface Configuration
Example
To limit the egress rate of queues 0, 1 and 2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
2
Related
show mls qos interface
Commands
C613-50103-01 REV A
Parameter
Description
<bandwidth>
Bandwidth <1-40000000 kbits> (usable units: k, m, g).
[0][2]...[7]
Selects one or more queues numbered 0 to 7.
configure terminal
interface port1.0.1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
wrr-queue egress-rate-limit 500M queues 0 1
1542

Advertisement

Table of Contents
loading

This manual is also suitable for:

X310-26fpX310-50fpX310-50ft

Table of Contents