Rip Commands; Introduction - Allied Telesis x310-26FT Command Reference Manual

22

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
RIP.
For information about configuring RIP, see the
Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A
Guide.
"accept-lifetime" on page 783
"alliedware-behavior" on page 785
"cisco-metric-behavior
"clear ip rip route" on page 788
"debug rip" on page 789
"default-information originate
"default-metric (RIP)" on page 791
"distance (RIP)" on page 792
"distribute-list (RIP)" on page 793
"fullupdate (RIP)" on page 794
"ip rip authentication key-chain" on page 795
"ip rip authentication mode" on page 797
"ip rip authentication string" on page 800
"ip rip receive-packet" on page 802
"ip rip receive version" on page 803
"ip rip send-packet" on page 804
"ip rip send version" on page 805
"ip rip send version 1-compatible" on page 807
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x

RIP Commands

RIP Feature Overview and
(RIP)" on page 787
(RIP)" on page 790
781