Table of Contents
Advertisement
PIM-DM C
OMMANDS
-
SHOW IP PIM DENSE
MODE NEIGHBOR
show ip pim dense-mode neighbor
Overview
This command displays PIM-DM neighbor information.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip pim dense-mode neighbor
Mode
User Exec and Privileged Exec
Usage
The total number of PIM-DM neighbors is restricted to 500 PIM-DM neighbors.
When the 500 PIM-DM neighbor limit is reached, as a result of receiving hello
packets from new PIM-DM neighbors, a log entry will be issued to the log file in the
below format:
Example
awplus#
Output
Figure 32-5: Example output from the show ip pim dense-mode neighbor
C613-50103-01 REV A
<date> <time> <facility>.<severity> <program[<pid>]>: <message>
----------------------------------------------------------------
2008 Dec 10 00:58:39 user.err x908 PIM-DM[1150]: [VIF] Nbr
Create: Cannot create more than 500 neighbours - ignoring
neighbour 100.0.1.247/32 on vlan100
show ip pim dense-mode neighbor
command
Total number of neighbors: 500
Neighbor-Address
Interface
192.168.1.152
vlan2
192.168.1.149
vlan2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
Uptime/Expires
Ver
17:15:42/00:01:28 v2
17:15:34/00:01:34 v2
1347
Advertisement
Table of Contents
