Ipv6 Pim Ignore-Rp-Set-Priority - Allied Telesis x310-26FT Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 - - -
IPV PIM IGNORE RP SET PRIORITY

ipv6 pim ignore-rp-set-priority

Overview Use this command to ignore the RP-SET priority value, and use only the hashing
mechanism for RP selection.
Use the no variant of this command to disable this setting.
Syntax ipv6 pim ignore-rp-set-priority
no ipv6 pim ignore-rp-set-priority
Mode Global Configuration
Usage This command is used to inter-operate with older Cisco IOS versions.
awplus#
Example
awplus(config)#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
C613-50103-01 REV A
configure terminal
ipv6 forwarding
ipv6 multicast-routing
ipv6 pim ignore-rp-set-priority
configure terminal
no ipv6 pim ignore-rp-set-priority
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1282