Dot1X Initialize Supplicant - Allied Telesis x310-26FT Command Reference Manual

802.1X C
OMMANDS
1
DOT X INITIALIZE SUPPLICANT

dot1x initialize supplicant

This command removes authorization for a connected supplicant with the
Overview
specified MAC address or username. The connection will attempt to re-authorize
when the specified supplicant attempts to make use of the network connection.
NOTE
the reauthorization attempt is not triggered by this command. The attempt is triggered
by the first packet from the supplicant trying to access the network resources.
dot1x initialize supplicant {<macadd>|username}
Syntax
Mode Privileged Exec
Example To initialize the supplicant authentication, use the commands
awplus#
awplus(config)#
awplus(config)#
Validation show dot1x
Commands
show dot1x supplicant
Related dot1x initialize interface
Commands
C613-50103-01 REV A
: Reauthentication could be a long time after the use of this command because
Parameter
dot1x
initialize
supplicant
<macadd>
username
configure terminal
dot1x initialize supplicant 0090.99ab.a020
dot1x initialize supplicant guest
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
IEEE 802.1X Port-Based Access Control.
Initialize the port to attempt reauthentication.
Specify the supplicant to initialize.
MAC (hardware address of the supplicant.
The name of the supplicant entry.
1555