Auth-Mac Password - Allied Telesis x310-26FT Command Reference Manual

A C
UTHENTICATION OMMANDS
-
AUTH MAC PASSWORD

auth-mac password

Overview This command changes the password for MAC-based authentication.
Use the no variant of this command to return the password to its default.
Syntax auth-mac [encrypted] password <password>
no auth-mac password
Default By default, the password is the MAC address of the supplicant
Mode Global Configuration
Usage Changing the password increases the security of MAC-based authentication,
because the default password is easy for an attacker to discover. This is particularly
important if:
•
•
Examples To change the password to verySecurePassword, use the commands:
awplus#
awplus(config)#
Validation show running-config
Command
Related auth two-step enable
Commands
show auth
C613-50103-01 REV A
Parameter Description
auth-mac
MAC-based authentication
encrypted
Specify an encrypted password
password
Configure the password
<password>
The new password. Passwords can be up to 64 characters in length
and can contain any printable characters except
• ?
• " (double quotes)
• space
some MAC-based supplicants on the network are intelligent devices, such as
computers, and/or
you are using two-step authentication (see the "Ensuring Authentication
Methods Require Different Usernames and Passwords" section of the
and Port Authentication Feature_Overview and Configuration
configure terminal
auth-mac password verySecurePassword
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
AAA
Guide).
1634