Table of Contents
Advertisement
PIM-SM C
OMMANDS
-
IP PIM EXCLUDE
GENID
ip pim exclude-genid
Overview
Use this command to exclude the GenID option from Hello packets sent out by the
PIM module on a particular interface.This command is used to inter-operate with
older Cisco IOS versions.
Use the no variant of this command to revert to default settings.
Syntax
ip pim exclude-genid
no ip pim exclude-genid
Default
By default, this command is disabled; the GenID option is included.
Mode
Interface Configuration for a VLAN interface.
awplus#
Example
awplus(config)#
awplus(config-if)#
C613-50103-01 REV A
configure terminal
interface vlan2
ip pim exclude-genid
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1223
Advertisement
Table of Contents
