Ip Igmp Proxy-Service - Allied Telesis x310-26FT Command Reference Manual

IGMP IGMP S C
AND NOOPING OMMANDS
-
IP IGMP PROXY SERVICE

ip igmp proxy-service

Overview Use this command to enable the VLAN interface to be the upstream IGMP
proxy-service interface for the device. All associated downstream IGMP mroute
proxy interfaces on this device will have their memberships consolidated on this
proxy service interface, according to IGMP host-side functionality.
Use the no variant of this command to remove the designation of the VLAN
interface as an upstream proxy-service interface.
ip igmp proxy-service
Syntax
no ip igmp proxy-service
Mode Interface Configuration for a VLAN interface.
Usage This command applies to VLAN interfaces configured for IGMP Proxy.
This command is used with the
forwarding of IGMP reports to a proxy service interface for all forwarding entries for
this interface. You must also enable the downstream IGMP mroute proxy interfaces
on this device using the command
IGMP Proxy does not work with other multicast routing protocols, such as PIM-SM
or PIM-DM.
Example To designate vlan1 as the upstream proxy-service interface, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ip igmp mroute-proxy
Commands
C613-50103-01 REV A
ip igmp mroute-proxy
configure terminal
interface vlan1
ip igmp proxy-service
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
command to enable
ip igmp mroute-proxy.
1097