Show Ip Pim Sparse-Mode Mroute Detail - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM C
OMMANDS
-
SHOW IP PIM SPARSE MODE MROUTE DETAIL

show ip pim sparse-mode mroute detail

Overview This command displays detailed entries of the IP multicast routing table, or
detailed entries of the IP multicast routing table based on the specified address or
addresses.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip pim sparse-mode mroute [<group-address>] detail
Syntax
show ip pim sparse-mode mroute [<source-address>] detail
show ip pim sparse-mode mroute [<group-address>
<source-address>] detail
show ip pim sparse-mode mroute [<source-address>
<group-address>] detail
Usage Based on the group and source address, the output is the selected route if present
in the multicast route tree.
Mode User Exec and Privileged Exec
awplus#
Examples
awplus#
awplus#
awplus#
detail
C613-50170-01 Rev B
Parameter
<group-address>
<source-address>
detail
show ip pim sparse-mode mroute detail
show ip pim sparse-mode mroute 40.40.40.11 detail
show ip pim sparse-mode mroute 224.1.1.1 detail
show ip pim sparse-mode mroute 224.1.1.1 40.40.40.11
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Group IP address, entered in the form A.B.C.D. Output is all
multicast entries belonging to that group.
Source IP address, entered in the form A.B.C.D. Output is all
multicast entries belonging to that source.
Show detailed information.
"Getting Started
Guide.
1363