Ipv6 Mld Ssm-Map Static - Allied Telesis x310-26FT Command Reference Manual

MLD MLD S C
AND NOOPING OMMANDS
6 -
IPV MLD SSM MAP STATIC

ipv6 mld ssm-map static

Overview Use this command to statically define a Source Specific Multicast (SSM) mapping.
The SSM mapping statically assigns sources to MLDv1 groups to translate such
(*,G) groups' memberships to (S,G) memberships for use with PIM-SSM.
Use the no variant of this command to remove the SSM map association.
Syntax ipv6 mld ssm-map static <access-list-name> X:X::X:X
no ipv6 mld ssm-map static <access-list-name> X:X::X:X
Mode Global Configuration
Usage Use this command to configure SSM mappings after enabling SSM mapping with
the
Example This example shows how to configure an SSM static mapping for the
group-address ff0e::1/128.
awplus#
awplus(config)#
awplus(config)#
ff0e::1/128
awplus(config)#
Related ipv6 mld ssm-map enable
Commands
C613-50103-01 REV A
Parameter
<access-list-name>
X:X::X:X
ipv6 mld ssm-map enable
configure terminal
ipv6 mld ssm-map enable
ipv6 access-list standard v6grp permit
ipv6 mld ssm-map static v6grp 2006::3
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
IPv6 named standard access-list.
IPv6 source address that is associated with the above
access-list. The IPv6 address uses the format X:X::X:X.
command.
1166