Table of Contents
Advertisement
OSPF
3
IP
6 C
V
FOR
V
OMMANDS
6
SHOW IPV
OSPF INTERFACE
show ipv6 ospf interface
Overview
Use this command in User Exec or Privileged Exec modes to display interface
information for OSPF for all interfaces or a specified interface, including OSPFv3
Authentication status for all interfaces or for a specified interface.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ipv6 ospf interface [<interface-name>]
Syntax
Mode
User Exec and Privileged Exec
Examples
awplus#
Output
Figure 25-12: Example output from the show ipv6 ospf interface command
C613-50103-01 REV A
Parameter
<interface-name>
show ipv6 ospf interface vlan2
showing OSPFv3 Authentication configuration information
highlighted in bold
awplus#show ipv6 ospf interface
vlan2 is up, line protocol is up
Interface ID 302
IPv6 Prefixes
fe80::215:77ff:fead:f87e/64 (Link-Local Address)
Security Policy
MD5 Authentication SPI 1000
NULL Encryption SHA-1 Auth, SPI 1001
OSPFv3 Process (10), Area 0.0.0.0, Instance ID 0
Router ID 192.168.1.2, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State Backup, Priority 1
Interface state Backup
Designated Router (ID) 192.168.1.1
Interface Address fe80::21d:e5ff:fec9:cfbe
Backup Designated Router (ID) 192.168.1.2
Interface Address fe80::215:77ff:fead:f87e
Timer interval configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in 00:00:07
Neighbor Count is 1, Adjacent neighbor count is 1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
An alphanumeric string that is the interface name. Omit the
optional interface to display OSPF
"Getting Started
Guide.
1044
Advertisement
Table of Contents
