Show Ipv6 Mroute - Allied Telesis x310-26FT Command Reference Manual

M C
ULTICAST OMMANDS
6
SHOW IPV MROUTE

show ipv6 mroute

Overview Use this command to display the contents of the IPv6 multicast routing (mroute)
table.
show ipv6 mroute [<ipv6-group-addr>] [<ipv6-source-addr>]
Syntax
[{count|summary}]
Mode User Exec and Privileged Exec
Examples awplus#
awplus#
awplus#
awplus#
awplus#
awplus#
Output The following is a sample output of this command displaying the IPv6 multicast
routing table for a single static IPv6 Multicast route:
Figure 29-8: Example output from the show ipv6 mroute command
C613-50103-01 REV A
Parameter
<ipv6-group-addr>
<ipv6-source-addr> Source IPv6 address, in hexadecimal notation in the format
count
summary
show ipv6 mroute
show ipv6 mroute count
show ipv6 mroute summary
show ipv6 mroute 2001::2 ff08::1 count
show ipv6 mroute 2001::2 ff08::1
show ipv6 mroute 2001::2 summary
awplus#show ipv6 mroute 
IPv6 Multicast Routing Table 
Flags: I - Immediate Stat, T - Timed Stat, F - Forwarder 
installed 
Timers: Uptime/Stat Expiry 
Interface State: Interface 
(2001::2, ff08::1), uptime 03:18:38 
Owner IMI, Flags: F 
Incoming interface: vlan2 
Outgoing interface list: 
vlan3 

Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Group IPv6 address, in hexadecimal notation in the format
X.X::X.X.
X.X::X.X.
Display the route and packet count from the IPv6 multicast
routing (mroute) table.
Display the contents of the IPv6 multicast routing (mroute)
table in an abbreviated form.
1204