Show Ipv6 Access-List (Ipv6 Hardware Acls) - Allied Telesis x310-26FT Command Reference Manual

IP 6 H A C
V ARDWARE CCESS ONTROL
6 - (IP 6 H
SHOW IPV ACCESS LIST V

show ipv6 access-list (IPv6 Hardware ACLs)

Overview Use this command to display all configured hardware IPv6 access-lists or the IPv6
access-list specified by name. Omitting the optional access-list name parameter
will display all IPv6 ACLs.
Use the show ipv6 access-list standard command to display the IPv6 access-list
specified by name as defined from the
show ipv6 access-list [<access-list-name>]
Syntax
show ipv6 access-list standard [<access-list-name>]
Mode User Exec and Privileged Exec
Examples To show the standard named ipv6 access-list acl_name use the following
command:
awplus#
Output Figure 35-1: Example output from the show ipv6 access-list standard
To show all configured ipv6 access-lists use the command:
awplus#
Output Figure 35-2: Example output from the show ipv6 access-list command
Related ipv6 access-list (named)
Commands
(ipv6 access-list named ICMP filter)
C613-50103-01 REV A
L (ACL) C
IST OMMANDS
ACL )
ARDWARE S
Parameter
standard
<access-list-name>
show ipv6 access-list standard acl_name
command
Named Standard IPv6 access-list acl_name
deny any
show ipv6 access-list
IPv6 access-list deny_icmp
deny icmp any any vlan 1

IPv6 access-list deny_ssh
deny tcp abcd::0/64 any eq 22
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ipv6 access-list (named)
Description
Named standard access-list.
Hardware IPv6 access-list name.
command.
1457