Debug Pim Sparse-Mode - Allied Telesis x310-26FT Command Reference Manual

PIM-SM C
OMMANDS
-
DEBUG PIM SPARSE MODE

debug pim sparse-mode

Overview Use this command to activate/de-activate all PIM-SM debugging.
debug pim sparse-mode [all] [events] [mfc] [mib] [nexthop] [nsm]
Syntax
[packet] [state] [mtrace]
no debug pim sparse-mode [all] [events] [mfc] [mib] [nexthop]
[nsm] [packet] [state] [mtrace]
Mode Privileged Exec and Global Configuration
awplus#
Example
awplus(config)#
Related show debugging pim sparse-mode
Commands
undebug all pim sparse-mode
C613-50103-01 REV A
Parameter Description
all
Activates/deactivates all PIM-SM debugging.
events
Activates debug printing of events.
mfc
Activates debug printing of MFC (Multicast Forwarding Cache in kernel)
add/delete/updates.
mib
Activates debug printing of PIM-SM MIBs.
nexthop
Activates debug printing of PIM-SM next hop communications.
nsm
Activates debugging of PIM-SM Network Services Module
communications.
packet
Activates debug printing of incoming and/or outgoing packets.
state
Activates debug printing of state transition on all PIM-SM FSMs.
mtrace
Activates debug printing of multicast traceroute.
configure terminal
debug pim sparse-mode all
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1212