Access-List (Hardware Ip Numbered) - Allied Telesis x310-26FT Command Reference Manual

IP 4 H A C
V ARDWARE CCESS ONTROL
- ( IP
ACCESS LIST HARDWARE NUMBERED

access-list (hardware IP numbered)

Overview This command creates an access-list for use with hardware classification, such as
QoS. The access-list will match on either TCP or UDP type packets that have the
specified source and destination IP addresses and Layer 4 port values or ranges.
The parameter any may be specified if an address does not matter and the port
values are optional.
The no variant of this command removes the previously specified IP hardware
access-list.
access-list <3000-3699>
Syntax [ip]
{deny|permit|copy-to-cpu|copy-to-mirror|send-to-mirror|
send-to-cpu} ip <source> <destination> [vlan
<1-4094>]
access-list <3000-3699>
Syntax [icmp]
{deny|permit|copy-to-cpu|copy-to-mirror|send-to-mirror|
send-to-cpu} icmp <source> <destination> 
[icmp-type <type-number>]
no access-list <3000-3699>
Table 34: Parameters in the access-list (hardware IP numbered) command -
C613-50103-01 REV A
L (ACL) C
IST OMMANDS
)
ip|icmp
Parameter Description
<3000-3699>
Hardware IP access-list number.
deny
Access-list rejects packets that match the source and destination
filtering specified with this command.
permit
Access-list permits packets that match the source and
destination filtering specified with this command.
copy-to-cpu
Specify packets to copy to the CPU.
copy-to-mirror
Specify packets to copy to the mirror port.
send-to-mirror
Specify packets to send to the mirror port.
send-to-cpu
Specify packets to send to the CPU.
icmp
ICMP packet.
ip
IP packet.
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1356