Table of Contents
Advertisement
A
C
UTHENTICATION
OMMANDS
-
SHOW AUTH TWO
STEP SUPPLICANT BRIEF
show auth two-step supplicant brief
Overview
This command displays the supplicant state of the two-step authentication feature
on the interface.
show auth two-step supplicant [interface <ifrange>] brief
Syntax
Mode
Privileged Exec
Usage
Do not mix interface types in a list. The specified interfaces must exist.
Example
To display the supplicant state of the two-step authentication feature, enter the
command:
awplus#
Output
Figure 39-7: Example output from show auth two-step supplicant brief
interface port1.0.6
authenticationMethod: dot1x/mac
Two-Step Authentication:
firstMethod:mac
secondMethod:dot1x
totalSupplicantNum: 1
authorizedSupplicantNum: 1
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 1
webBasedAuthenticationSupplicantNum: 0
otherAuthenticationSupplicantNum: 0
Interface
VID Mode
========== === ====
port1.0.6
1
D
Related
auth two-step enable
Commands
C613-50103-01 REV A
Parameter
Description
interface
The interface selected for display.
<ifrange>
The interface types which can be specified as <ifrange>
• Switch port (e.g. port1.0.6)
• Static channel group (e.g. sa3)
• Dynamic (LACP) channel group (e.g. po4)
show two-step supplicant interface port1.0.6 brief
MAC Address
===========
000b..db67.00f7
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Status
FirstStep
======
=========
Authenticated
Pass
SecondStep
==========
Pass
1692
Advertisement
Table of Contents
