Ip Pim Register-Suppression - Allied Telesis x310-26FT Command Reference Manual

PIM-SM C
OMMANDS
-
IP PIM REGISTER SUPPRESSION

ip pim register-suppression

Overview Use this command to configure the register-suppression time, in seconds,
overriding the default of 60 seconds. Configuring this value modifies
register-suppression time at the DR. Configuring this value at the RP modifies the
RP-keepalive-period value if the
Use the no variant of this command to reset the value to its default of 60 seconds.
ip pim register-suppression <1-65535>
Syntax
no ip pim register-suppression
Mode Global Configuration
awplus#
Example
awplus(config)#
C613-50103-01 REV A
Parameter Description
<1-65535>
Register suppression on time in seconds.
configure terminal
ip pim register-suppression 192
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ip pim rp-register-kat command is not used.
1233