Table of Contents
Advertisement
OSPF C
OMMANDS
SHOW IP OSPF DATABASE OPAQUE
show ip ospf database opaque-area
Overview
Use this command to display information about the area-local (link state type 10)
scope LSAs. Type-10 Opaque LSAs are not flooded beyond the borders of their
associated area.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip ospf database opaque-area [<ip-address>]
Syntax
[self-originate|<advrouter>]
Mode
User Exec and Privileged Exec
awplus#
Examples
self-originate
awplus#
awplus#
2.3.4.5
Output
Figure 24-10: Example output from the show ip ospf database opaque-area
C613-50103-01 REV A
-
AREA
Parameter
Description
<advrouter>
adv-router <ip-address>
adv-router
Displays all the LSAs of the specified router.
<ip-address>
A link state ID, as an IP address.
self-originate Displays self-originated link states.
show ip ospf database opaque-area 1.2.3.4
show ip ospf database opaque-area self-originate
show ip ospf database opaque-area 1.2.3.4 adv-router
command
OSPF Router process 100 with ID (10.10.11.50)
Area-Local Opaque-LSA (Area 0.0.0.0)
LS age: 262
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: Area-Local Opaque-LSA
Link State ID: 10.0.25.176 (Area-Local Opaque-Type/ID)
Opaque Type: 10
Opaque ID: 6576
Advertising Router: 10.10.11.50
LS Seq Number: 80000001
Checksum: 0xb413
Length: 26
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
943
Advertisement
Table of Contents
