Table of Contents
Advertisement
M
C
ULTICAST
OMMANDS
MULTICAST
multicast
Overview
Use this command to enable a device port to route multicast packets that ingress
the port.
Use the no variant of this command to stop the device port from routing multicast
packets that ingress the port. Note that this does not affect Layer 2 forwarding of
multicast packets. If you enter no multicast on a port, multicast packets received
on that port will not be forwarded to other VLANs, but ports in the same VLANs as
the receiving port will still receive the multicast packets.
CAUTION
non-multicast protocols use multicast packets and will not function correctly if you
disable it.
multicast
Syntax
no multicast
Default
By default, all device ports route multicast packets.
Mode
Interface Configuration
Examples
To disable routing of multicast packets on a port, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To re-enable routing of multicast packets on a port, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation
show running-config
Commands
C613-50103-01 REV A
: We do not recommend disabling multicast routing in a live network. Some
configure terminal
interface port1.0.1
no multicast
configure terminal
interface port1.0.1
multicast
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1199
Advertisement
Table of Contents
