Debug Pim Sparse-Mode Timer - Allied Telesis x310-26FT Command Reference Manual

PIM-SM C
OMMANDS
-
DEBUG PIM SPARSE MODE TIMER

debug pim sparse-mode timer

Overview Use this command to enable debugging for the specified PIM-SM timers.
Use the no variants of this command to disable debugging for the specified
PIM-SM timers.
Syntax debug pim sparse-mode timer assert [at]
no debug pim sparse-mode timer assert [at]
debug pim sparse-mode timer bsr [bst|crp]
no debug pim sparse-mode timer bsr [bst|crp]
debug pim sparse-mode timer hello [ht|nlt|tht]
no debug pim sparse-mode timer hello [ht|nlt|tht]
debug pim sparse-mode timer joinprune [jt|et|ppt|kat|ot]
no debug pim sparse-mode timer joinprune [jt|et|ppt|kat|ot]
debug pim sparse-mode timer register [rst]
no debug pim sparse-mode timer register [rst]
C613-50103-01 REV A
Parameter Description
assert
Enable or disable debugging for the Assert timers.
at
Enable or disable debugging for the Assert Timer.
bsr
Enable or disable debugging for the specified Bootstrap Router timer, or
all Bootstrap Router timers.
bst
Enable or disable debugging for the Bootstrap Router: Bootstrap Timer.
crp
Enable or disable debugging for the Bootstrap Router: Candidate-RP
Timer.
hello
Enable or disable debugging for the specified Hello timer, or all Hello
timers.
ht
Enable or disable debugging for the Hello timer: Hello Timer.
nlt
Enable or disable debugging for the Hello timer: Neighbor Liveness
Timer.
tht
Enable or disable debugging for the Hello timer: Triggered Hello Timer.
joinprune Enable or disable debugging for the specified JoinPrune timer, or all
JoinPrune timers.
jt
Enable or disable debugging for the JoinPrune timer: upstream Join
Timer.
et
Enable or disable debugging for the JoinPrune timer: Expiry Timer.
ppt
Enable or disable debugging for the JoinPrune timer: PrunePending
Timer.
kat
Enable or disable debugging for the JoinPrune timer: KeepAlive Timer.
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
1213