Ipv6 Access-List Standard (Named) - Allied Telesis x310-26FT Command Reference Manual

X310 series stackable access switches for alliedware plus version 5.4.6-1.x
Table of Contents

Advertisement

IP
6 S
A
C
V
OFTWARE
CCESS
ONTROL
6
-
(
IPV
ACCESS
LIST STANDARD
NAMED

ipv6 access-list standard (named)

Overview
This command configures an IPv6 standard access-list for filtering frames that
permit or deny IPv6 packets from a specific source IPv6 address.
The no variant of this command removes a specified IPv6 standard access-list.
Syntax
ipv6 access-list standard <ipv6-acl-list-name>
[list-name]
no ipv6 access-list standard <ipv6-acl-list-name>
ipv6 access-list standard <ipv6-acl-list-name> [{deny|permit}
Syntax [deny|
{<ipv6-source-address/prefix-length>|any} [exact-match]]
permit]
no ipv6 access-list standard <ipv6-acl-list-name>
[{deny|permit} {<ipv6-source-address/prefix-length>|any}
[exact-match]]
Mode
Global Configuration
Default
Any traffic controlled by a software ACL that does not explicitly match a filter is
denied.
Usage
Use IPv6 standard access-lists to control the transmission of IPv6 packets on an
interface, and restrict the content of routing updates. The switch stops checking
the IPv6 standard access-list when a match is encountered.
C613-50103-01 REV A
L
(ACL) C
IST
OMMANDS
)
Parameter
<ipv6-acl-list-name>
Parameter
<ipv6-acl-list-name>
deny
permit
<ipv6-source-address/
prefix-length>
any
exact-match
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
A user-defined name for the IPv6 software standard
access-list.
Description
A user-defined name for the IPv6 software standard
access-list.
The IPv6 software standard access-list rejects
packets that match the type, source, and destination
filtering specified with this command.
The IPv6 software standard access-list permits
packets that match the type, source, and destination
filtering specified with this command.
Specifies a source address and prefix length.
The IPv6 address prefix uses the format
X:X::/prefix-length. The prefix-length is usually set
between 0 and 64.
Matches any source IPv6 address.
Exact match of the prefixes.
1473

Advertisement

Table of Contents
loading

This manual is also suitable for:

X310-26fpX310-50fpX310-50ft

Table of Contents