Ripng For Ipv6 Commands; Introduction; Chapter 23: Ripng For Ipv6 Commands - Allied Telesis x310-26FT Command Reference Manual

23

Introduction

Overview This chapter contains RIPng commands. RIPng (Routing Information Protocol next
generation) is an extension of RIPv2 to support IPv6. RFC 2080 specifies RIPng. The
differences between RIPv2 and RIPng are:
•
•
•
For more information, see the
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A
RIPng does not support RIP updates authentication
RIPng does not allow the attachment of arbitrary tags to routes
RIPng requires the encoding of the next-hop for a set of routes
"aggregate-address (IPv6
"clear ipv6 rip route" on page 837
"debug ipv6 rip" on page 838
"default-information originate (IPv6
"default-metric (IPv6 RIPng)" on page 840
"distribute-list (IPv6 RIPng)" on page 841
"ipv6 rip metric-offset" on page 842
"ipv6 rip split-horizon" on page 844
"ipv6 router rip" on page 845
"neighbor (IPv6 RIPng)" on page 846
"offset-list (IPv6 RIPng)" on page 847
"passive-interface (IPv6
"recv-buffer-size (IPv6
"redistribute (IPv6 RIPng)" on page 850
"route (IPv6 RIPng)" on page 851
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIPng for IPv6
Commands
RIPng Feature Overview and Configuration
RIPng)" on page 836
RIPng)" on page 839
RIPng)" on page 848
RIPng)" on page 849
Guide.
834